Accessories

This simple piece of gear gets an upgrade. The ORIGINAL 1 PAIR 160-210 ski sleeve is now compatible with skis from 160-210cm (including 2 x Nordic skis). - Volume: 40 liters - Weight: 425g - Dimensions: 190 x 32cm Features & Fabrics: OPENING & CLOSURE - 3/4 length opening CARRYING SYSTEM - Padded handle: This padded handle ensures great comfort while carrying the bag with one hand. - Adjustable handle strap position MISCELLANEOUS - Roll-on storage - Adjustable length of 160 to 210cm FABRICS - 450D fabrics: The fabric resists 500 mm water pressure. - 600D polyester fabric: The fabric resists 500 mm water pressure. SUSTAINABILITY - PFC-free - Body: 100% Polyester - Lining: 100% Polyester

Superb in changing conditions! Klister for competition and training. - Racing klister - Temperature range -3°C to +5°C - For competitive athletes - Superior klister in changing conditions KN44 Nero klister can handle changing snow conditions very well and it has great anti-icing properties. Temperature range -3°C to +5°C (27°F to 41°F). SWIX Nero are revolutionary klisters with a black ingredient that has shown an impressive performance. They collect significantly less dirt from the snow than traditionally klisters. They are durable and stay better within the kick-zone than other klisters. NERO provides a secure kick over longer time than traditional klisters, due to their special characteristics.

Waxing profile for cross country skis. Stable economy profile in aluminum and plastic. Lightweight and easy to adjust. Same profile at front and rear so can be used in both directions. Consists of two parts (each approx. 110 cm) that fit into each other and thereby take up little space for transport and storage. Adjustable in length from 150 cm to 210 cm. Can be used with legs T0079-1 or T0790-K clamps. Weight: 1.8 kg. - Waxing profile - For prepping cross-country skis - For keen cross country skiers - Lightweight and easy to adjust

Transparent polyethylene sticks for repairing ski bases. Easy to work with. Ø 6 mm. 4 sticks per pack. First clean the damaged area in the base and scrape out any loose residue. Heat the polystick and drip into the damaged area in the base. Let it cool down and scrape away the excess with a steel scraper, or panzer file if necessary, and polish over with Fibertex for a fine finish. - Polyethylene Stick - For repairing ski bases - For racing service and ski workshops - Easy to work with

Gives faster skis. Cleaner & conditioner glide sections of racing skis and snowboards. - Ski Cleaner for glide zone. - For everyone who waxes their skis. Cleaner for fluoro glide wax and CH-wax. Improves glide and conditions the base. For glide sections only on all racing skis and snowboards. Involves no hard mechanical treatment of the base. No wearing of the stone grind pattern in the ski base. Makes the ski faster! Apply cleaner (I84C) with Fiberlene. Brush with white nylon brush while wet. Wipe clean with Fiberlene. Let dry for 5-30 minutes. Brush with hand steel brush (or Roto steel brush). Wax with Base Prep wax. 16.9 fl. oz.

210cm roller carry bag can hold up to 10 pairs of Nordic skis. Double zipper and compression straps keep things secure with easy access when needed. Reinforced bottom and durable wheels move easily and safely across any surface. Made of recycled PET fabric.

Quick and Easy! Liquid grip wax for zero conditions. Liquid grip wax covering the range on the cold side below freezing in new and fine-grained snow conditions. 0°C to -3°C (32°F to 27°F). 2.4 fl. oz. For dedicated skiers demanding a fast and clean product with reliable kick qualities. Upside down applicator for better control! *Extremely flammable aerosol. Pressurized container: May burst if heated. Causes skin irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects.

A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. HS6L is especially developed for cold conditions, down to -12°C (10°F). Below this point liquids are normally outperformed by traditional paraffin waxes. - HS6L is a versatile wax that works in all snow conditions, but performs at its best when the humidity is high. - Replaces the CH6XL. - -4°C to -12°C (25°F to 10°F).

HS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. HS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS6 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 155°C (311°F). Highlights: - Fantastic allround glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Exists also in liquid - Well tested on many conditions

TS5B - Top Speed 5 Black. Excellent dry-friction properties! The TSB series are gliders for competition that works extremely well on dirty snow and when dry friction conditions. The 5 series is the hardest wax in the TSB line, and is a great choice in cold conditions, both for alpine and cross country. It is loved by servicemen, due to its great durability and properties when the snow is dirty. This is achieved thanks to the black solid lubricant additive that also reduces friction when very cold snow. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after approx. one minute. Important to have a good iron to get an efficient melting of the wax. TS5B can be used as a race wax alone or as a base for top coats. Recommended iron temp.: 160°C (320°F)

Great for typical klister conditions! The KX klisters are durable klisters custom-made for different conditions. Temperature range -2°C to +4°C (28°F to 39°F). All-round klister. For wet coarse snow as well as frozen corn snow. Scraper included.

Swix Snow Thermometers are ideal for checking snow and weather conditions in order to choose the correct wax.

V-Line of Traditional Hardwaxes The V-Line of hardwaxes is the traditional line of hard kick-waxes, made for racing and recreational skiing. Although they do not have any fluorine additives, their quality is very high due to fully refined petroleum waxes, synthetic rubbers and pharmaceutical quality oils. The V-waxes, in certain the cold-snow waxes are frequently used in top racing, alone or in combination with VR-waxes. V05 As the name indicates, this is hardwax made for the coldest conditions. Frequently used in the polar regions of Europe and North America. New fallen snow -12°C to -25°C (10°F to -12°F). Transformed fine grained snow -15°C to -30°C (5°F to -22°F). V20 The well known cold snow wax, used for more than fifty years, has been modernized several times with new components. New fallen snow -8°C to -15°C (18°F to 5°F). Transformed fine grained snow -10°C to -18°C (14°F to 0°F). V30 Another truly classic Swix wax. To be used on moderate cold snow when skiing is at its best. New fallen snow -2°C to -10°C (28°F to 14°F). Transformed fine grained snow -5°C to -15°C (23°F to 5°F). V40 The most popular V-wax. A very flexible and versatile wax covering a large temperaturerange on the cold side of freezing. To be utilized close to 0°C, demands relatively new snow and low air humidity (below 45-50%). New fallen snow -1°C to -7°C (30°F to 19°F). Transformed fine grained snow -3°C to -10°C (27°F to 14°F).

CH stands for Hydrocarbon. This category has no fluorocarbon material in the blends. They are 100% high performance hydrocarbon paraffins. Although they can be looked upon as an economical racing wax group, the colder waxes perform very well alone, and the warmer waxes make an acceptable base layer for Cera F. Their colors and temperature ranges coincide with the HFX and LFX Waxes. The CHX waxes can be distinguished from the LFX waxes by their darker shade of color. Comes in 60 gram or 180 gram bar size (CH3 in 30 gram), and also 900 gram packages. CH3X Cold Powder. Temperature range from -12°C to -32°C (12°F to -26°F). This is a special synthetic hydrocarbon powder wax to add to other waxes to increase their durability and to protect the base from ice abrasion. For especially abrasive snow, such as newly man-made snow, apply the wax of choice and then iron. While the wax is still in liquid form, or at least still warm, sprinkle CH3X over the wax. Even a generous amount will not effect glide. Then iron the CH3X powder into the wax layer. Allow cooling, then scrape and brush away the excess. CH04X Temperature range from -12°C to -32°C (10°F to -25°F). Recommended iron temp: 155°C (311°F). A new cold hydrocarbon wax for extreme cold conditions, which can perfectly be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has a great durability. In the warmer part of the temperature range, and when high air humidity, Cera F powder, such as FC04X will increase the performance. CH05X Temperature range from -8°C to -14°C (18°F to 7°F). Recommended iron temp: 150°C (311°F). The 5 series is brand new for the Cera Nova X line, and fulfill a hardness gap between the 4 and the 6 series. It’s easier to apply than the 4 series, but provides outstanding glide properties within its temperature range, and has a great durability. CH05X can be used as a race wax alone, but is often used as a base for Cera F powder, such as FC05X. CH06X Temperature range from -5°C to -10°C (23°F to 14°F). Recommended iron temp: 145°C (293°F). Our std. CH6 has been a success in the Cera Nova system, and through comprehensive testing we have not found anything better. It is an economic training and racing wax as well as a base prep wax for cold skis. CH06X has high durability and offer great performance in most snow conditions as well as on artificial and glacier snow. CH07X Temperature range from -2°C to -8°C (28°F to 18°F). Recommended iron temp: 140°C (284°F). A new and improved wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. It is an economic training and racing wax as well as an all round base prep wax. CH08X Temperature range from -4°C to 4°C (25°F to 39°F). Recommended iron temp: 130°C (266°F). A continuation of the std. CH8. An economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with.

This is a complete new klister line based upon new formulas that has a logical build up going from hard to soft, from cold corn snow to extreme wet corn snow. The higher the number, the softer the wax. The KX line is designed for top level competitions as well as recreational skiing. • Better kick and glide! • More fun less mess. • New packaging. • Smaller opening on tubes for better control when applying. • Includes scraper. • 55g KX40S - +2°C to -4°C (36°F to 25°F). Developed for transformed and fine grained snow. Very good when warmer than 0°C and relatively fine grained snow. The klister that goes the farthest into dry snow without icing! KX65 - +1°C to +5°C (34°F to 41°F). For wet and moist coarse corn snow. Scraper included. KX75 - +2°C to +15°C (36°F to 59°F). Wet snow klister. Used when the snow has a high water content such as slush, and the air temperature is well above freezing. Late spring klister.

For new and new fallen fine-grained snow from 0°C to -3°C (32°F to 27°F). Old/partly transformed snow from -1°C to -6°C (30°F to 21°F). Purple kick wax designed for conditions a few degrees below the freezing point. Provides perfect kick until you experience moderate shiny tracks. The wax contains a new additive designed to impart maximum lubricity. This improves the stick-slip properties of the wax and gives an excellent feeling. Apply each layer thin – then smoothen the surface with a synthetic cork (T12). The VP-line is primarily designed for racers and ambitious non-racing individuals but can also be used by recreational skiers who wants the optimum skiing experience. - VP-line from Swix - Kick wax - For training and competition - Fluoro free - Durable - Ski wax from Swix

Perfect for "real" winter conditions. Fluoro free, blue kick wax for cold and dry winter conditions. - Fluror free kickwax - For racing - For new and new fallen fine-grained snow from -4°C to -10°C (25°F to 14°F). - Old/partly transformed snow from -5°C to -14°C (23°F to 7°F). Blue kick wax is designed for dry and cold winter conditions. A safe choice for normal midwinter inland conditions. Apply each layer thin – then smoothen the surface with a synthetic cork (T12). The VP-line is primarily designed for racers and ambitious non-racing individuals but can also be used by recreational skiers who want the optimum skiing experience.

A great wax for both base-prep and training. It can also be used as a race wax, preferably used with a top coat. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 150°C (302°F). Replaces the LF8X. Highlights: - Easy to work with - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions

PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). - Recommended iron temp: 130°C (266°F). - Replaces the CH8X. - -4°C to +4°C (25°F to 39°F).

PS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. PS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as a race wax alone or as a base for powders and other top coats. Recommended iron temp: 145°C (293°F). - Recommended iron temp: 145°C (293°F). - Replaces the CH6X - -6°C to -12°C (21°F to 10°F).

Fantastic mid-layer klister! The KX klisters are durable klisters custom-made for different conditions. Temperature range +1°C to -4°C (32°F to 25°F). Excellent klister on transformed cold coarse corn snow starting to get wet. Midlayer klister applied on Base klister (KX20 or KB20) to avoid that the top layer klister slides back into the glide zone. Scraper included.

Environmentally-friendly waterproofing for high-quality protective clothing. Reliable protection against moistness on an ecological basis. Features: - Ideal for breathable and other textile fabrics - Preserves the breathability of modern membrane textiles (e.g. Gore-Tex) - Highly effective thanks to the latest research findings - Makes the fabric water resistant - Environmentally-friendly trigger spray without propellant gas - Free from fluorocarbons - Biodegradable

Professional fixation device for securing cross country skis (skating and classic). The large profiles offer a wide support area for professional work on the ski. For use with Toko Workbench (the large one) ONLY. Supplied without Extract pole.

Superior durability! Baseklister in the KX series, for all conditions. For enthusiasts and racers, great durability. Base klister for cold and warm conditions. To be used as the first layer for better adhesion of other klisters to the base. High wear resistance on ice and hard coarse snow. Always apply indoors with a waxing iron appr. 110°C (230°F). Only cover the sanded grip zone. Heat the tube slightly for easier application. By “edging” the waxing iron you get a controlled equal distribution of the klister. Scraper included.

Liquid paraffin wax to meet the high demands of junior racing and for training sessions in all disciplines. No shipping to Alaska (please buy locally). - Yellow for warm conditions (Snow temp 32f to 21f) - Red for medium conditions (Snow temp 25f to 10f) - Blue for cold conditions (Snow temp 14f to -22f) - A good practice is to “aim cold” with these waxes. Blue is an excellent overall wax.

The 5 series is the hardest wax in the HS line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It’s a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow. - HS5 can be used as a race wax alone or as a base for top coats. - Recommended iron temp: 150°C (311°F). - -10°C to -18°C (14°F to 0°F).

The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. PS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) - Recommended iron temp: 150°C (311°F). - Replaces the CH5X. - -10°C to -18°C (14°F to 0°F).

Ski straps for cross-country skis with ski base protection. Height: 35 mm. - Ski strap - For cross-country skis - For cross-country skiers - Strong Velcro fastening

Practical combi cork for polishing Cera F and liquid topping. High quality natural cork with felt/ for application of Cera F.

PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end result. PS7 is an economic training and racing wax as well as an all-round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F). - Recommended iron temp: 140°C (284°F). - Replaces the CH7X. - -2°C to -8°C (28°F to 18°F).