ski sale

To replace defective Prolink Flexor Classic 85 compatible with Prolink Race & Pro bindings.

Ski straps for cross-country skis with ski base protection. Height: 35 mm. - Ski strap - For cross-country skis - For cross-country skiers - Strong Velcro fastening

Practical scraper for removal of wax and klister. Handy format. For all skiers.

Upgrade your old buckles with a set of freshies, or keep a spare pair handy in case of emergency. Although not as impossible as riding without an ankle buckle, riding with a missing or broken toe buckle is less than ideal. Fix the problem or prepare in advance by packing a spare set. Compatible with Burton bindings featuring Smooth Glide buckles. - Compatible with all men's and women's Burton bindings with Smooth Glide buckles - Includes one pair of Smooth Glide buckles with mounting screws

Protect the investment made in skis by using the Swix high quality ski sleeve. Felt lined sleeves separate and protect XC ski bases Compatible with race,XC, skate, or classic skis up to 45mm wide

Locking cap for PC-handle, silver

Synthetic Fiber Towel For wiping off ski wax Use with Swix base cleaner.

Synthetic cork with higher density.

Practical combi cork for polishing Cera F and liquid topping. High quality natural cork with felt/ for application of Cera F.

CH stands for Hydrocarbon. This category has no fluorocarbon material in the blends. They are 100% high performance hydrocarbon paraffins. Although they can be looked upon as an economical racing wax group, the colder waxes perform very well alone, and the warmer waxes make an acceptable base layer for Cera F. Their colors and temperature ranges coincide with the HFX and LFX Waxes. The CHX waxes can be distinguished from the LFX waxes by their darker shade of color. Comes in 60 gram or 180 gram bar size (CH3 in 30 gram), and also 900 gram packages. CH3X Cold Powder. Temperature range from -12°C to -32°C (12°F to -26°F). This is a special synthetic hydrocarbon powder wax to add to other waxes to increase their durability and to protect the base from ice abrasion. For especially abrasive snow, such as newly man-made snow, apply the wax of choice and then iron. While the wax is still in liquid form, or at least still warm, sprinkle CH3X over the wax. Even a generous amount will not effect glide. Then iron the CH3X powder into the wax layer. Allow cooling, then scrape and brush away the excess. CH04X Temperature range from -12°C to -32°C (10°F to -25°F). Recommended iron temp: 155°C (311°F). A new cold hydrocarbon wax for extreme cold conditions, which can perfectly be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has a great durability. In the warmer part of the temperature range, and when high air humidity, Cera F powder, such as FC04X will increase the performance. CH05X Temperature range from -8°C to -14°C (18°F to 7°F). Recommended iron temp: 150°C (311°F). The 5 series is brand new for the Cera Nova X line, and fulfill a hardness gap between the 4 and the 6 series. It’s easier to apply than the 4 series, but provides outstanding glide properties within its temperature range, and has a great durability. CH05X can be used as a race wax alone, but is often used as a base for Cera F powder, such as FC05X. CH06X Temperature range from -5°C to -10°C (23°F to 14°F). Recommended iron temp: 145°C (293°F). Our std. CH6 has been a success in the Cera Nova system, and through comprehensive testing we have not found anything better. It is an economic training and racing wax as well as a base prep wax for cold skis. CH06X has high durability and offer great performance in most snow conditions as well as on artificial and glacier snow. CH07X Temperature range from -2°C to -8°C (28°F to 18°F). Recommended iron temp: 140°C (284°F). A new and improved wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. It is an economic training and racing wax as well as an all round base prep wax. CH08X Temperature range from -4°C to 4°C (25°F to 39°F). Recommended iron temp: 130°C (266°F). A continuation of the std. CH8. An economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with.

V-Line of Traditional Hardwaxes The V-Line of hardwaxes is the traditional line of hard kick-waxes, made for racing and recreational skiing. Although they do not have any fluorine additives, their quality is very high due to fully refined petroleum waxes, synthetic rubbers and pharmaceutical quality oils. The V-waxes, in certain the cold-snow waxes are frequently used in top racing, alone or in combination with VR-waxes. V05 As the name indicates, this is hardwax made for the coldest conditions. Frequently used in the polar regions of Europe and North America. New fallen snow -12°C to -25°C (10°F to -12°F). Transformed fine grained snow -15°C to -30°C (5°F to -22°F). V20 The well known cold snow wax, used for more than fifty years, has been modernized several times with new components. New fallen snow -8°C to -15°C (18°F to 5°F). Transformed fine grained snow -10°C to -18°C (14°F to 0°F). V30 Another truly classic Swix wax. To be used on moderate cold snow when skiing is at its best. New fallen snow -2°C to -10°C (28°F to 14°F). Transformed fine grained snow -5°C to -15°C (23°F to 5°F). V40 The most popular V-wax. A very flexible and versatile wax covering a large temperaturerange on the cold side of freezing. To be utilized close to 0°C, demands relatively new snow and low air humidity (below 45-50%). New fallen snow -1°C to -7°C (30°F to 19°F). Transformed fine grained snow -3°C to -10°C (27°F to 14°F).

New fallen snow 0°C to +1°C (32°F to 34°F). Old fine grained snow 0°C to -2°C (32°F to 28°F). For moist new snow up to +1°C (34°F) and down to -2°C (28°F) in older more transformed granular snow. The V-Line of hard kick-waxes is made for racing and recreational skiing. Their quality is very high due to fully refined petroleum waxes, synthetic rubbers and pharmaceutical quality oils.

Durable base wax! Base kick wax for transformed and new snow. Improved wear on kick wax. To be used as first layer for all hard waxes in new fallen snow, transformed fine-grained snow and old snow from +1°C to -20°C (30°F to -4°F). Rub on and iron in with a waxing iron (110°C/230°F). Cork smooth. Base wax is much easier to apply when it is cold. Store it in the fridge or in the snow before application.

Extremely durable base wax! Basebinder kick wax for transformed and old snow. Improved wear on kick wax. A durable base wax for all hard waxes in colder conditions than -1°C (30°F). To be used when the snow has been transformed (granular) and the wear on the wax is high. Rub on and iron in with a waxing iron (110°C/230°F). Cork smooth. Base wax is much easier to apply when it is cold. Store it in the fridge or in the snow before application.

A wax for extreme cold conditions, which can perfectly be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min.) for better durability. Scraping after approx. one minute. It’s important to have a good iron to get an efficient melting of the wax. Scraping after approx. one minute. In the warmer part of the temperature range, and when high air humidity, a powder or other top coat product will increase the performance. - Recommended iron temp: 155°C (311°F). - Replaces the CHX4. - -14°C/-32°C (7°F to -26°F).

The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. PS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) - Recommended iron temp: 150°C (311°F). - Replaces the CH5X. - -10°C to -18°C (14°F to 0°F).

PS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. PS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as a race wax alone or as a base for powders and other top coats. Recommended iron temp: 145°C (293°F). - Recommended iron temp: 145°C (293°F). - Replaces the CH6X - -6°C to -12°C (21°F to 10°F).

PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end result. PS7 is an economic training and racing wax as well as an all-round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F). - Recommended iron temp: 140°C (284°F). - Replaces the CH7X. - -2°C to -8°C (28°F to 18°F).

PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). - Recommended iron temp: 130°C (266°F). - Replaces the CH8X. - -4°C to +4°C (25°F to 39°F).

Get them ready for a full day of exploring in the Kids' Wintersport Full Cushion Polar Bear Pattern Over The Calf Socks. This cozy Merino wool sock features a playful polar bear design, full cushion, and a flat knit toe seam for additional comfort. Snow days just got a little warmer and a lot more fun. - Sock Height: Over-the-Calf - Sock Cushion: Full Cushion - Full cushion in leg and foot - Flat knit toe seam for additional comfort

Replacement cap and cup for thermo drink belt SW003, NNT16, SW033 and RE031. - Spare part - Fits with SW003, NNT16, SW033 and RE031 - Single cork for thermo drink belt SW003, NNT16, SW033 and RE031

Fantastic mid-layer klister! The KX klisters are durable klisters custom-made for different conditions. Temperature range +1°C to -4°C (32°F to 25°F). Excellent klister on transformed cold coarse corn snow starting to get wet. Midlayer klister applied on Base klister (KX20 or KB20) to avoid that the top layer klister slides back into the glide zone. Scraper included.

Gives faster skis. Cleaner & conditioner glide sections of racing skis and snowboards. - Ski Cleaner for glide zone. - For everyone who waxes their skis. Cleaner for fluoro glide wax and CH-wax. Improves glide and conditions the base. For glide sections only on all racing skis and snowboards. Involves no hard mechanical treatment of the base. No wearing of the stone grind pattern in the ski base. Makes the ski faster! Apply cleaner (I84C) with Fiberlene. Brush with white nylon brush while wet. Wipe clean with Fiberlene. Let dry for 5-30 minutes. Brush with hand steel brush (or Roto steel brush). Wax with Base Prep wax. 16.9 fl. oz.

Great in challenging conditions! Universal silver klister for recreational and racing skiers. Gives a great kick. Temperature range +3°C to -5°C (38°F to 23°F). A very flexible klister, working on both sides of freezing when conditions are changing between coarse and transformed moist to wet fine-grained snow. Scraper included.

Green base klister that is used as the first layer of klister. Temperature range -15°C to +10°C. NB: Apply thinly. Then apply regular klister for the relevant conditions as the next layer. Spray nozzle that makes it easy to apply a very even and thin layer of klister. To apply the base klister, hold the can upside down and move it slowly along the base, on each side of the central groove, while spraying. Hold the can approx. 4-5 cm. above the base. Great for both racing and recreational skiing. - Green base klister - Easy to apply. - Hold the can upside down and move it slowly along the base to apply the klister. - Great for both racing and recreational skiing. - An alternative to KX20. - No iron needed.

This is a complete new klister line based upon new formulas that has a logical build up going from hard to soft, from cold corn snow to extreme wet corn snow. The higher the number, the softer the wax. The KX line is designed for top level competitions as well as recreational skiing. • Better kick and glide! • More fun less mess. • New packaging. • Smaller opening on tubes for better control when applying. • Includes scraper. • 55g KX40S - +2°C to -4°C (36°F to 25°F). Developed for transformed and fine grained snow. Very good when warmer than 0°C and relatively fine grained snow. The klister that goes the farthest into dry snow without icing! KX65 - +1°C to +5°C (34°F to 41°F). For wet and moist coarse corn snow. Scraper included. KX75 - +2°C to +15°C (36°F to 59°F). Wet snow klister. Used when the snow has a high water content such as slush, and the air temperature is well above freezing. Late spring klister.

Superior durability! Baseklister in the KX series, for all conditions. For enthusiasts and racers, great durability. Base klister for cold and warm conditions. To be used as the first layer for better adhesion of other klisters to the base. High wear resistance on ice and hard coarse snow. Always apply indoors with a waxing iron appr. 110°C (230°F). Only cover the sanded grip zone. Heat the tube slightly for easier application. By “edging” the waxing iron you get a controlled equal distribution of the klister. Scraper included.

Great kick in icy conditions! The KX klisters are durable klisters custom-made for different conditions. Temperature range 0°C to -12°C (32°F to 10°F). For coarse snow/hard tracks and icy conditions. Excellent on hard-packed coarse cold snow, but can also be an alternative to KX20 as base klister. It is easier to apply than KX20. In racing KX30 is often used as the "in-between" klister on top of KX20, but rarely used as the last layer due to the preparation of the tracks. For general skiing on cold mornings after it has been wet the day before, it is a highly useful product. Scraper included.

Great for typical klister conditions! The KX klisters are durable klisters custom-made for different conditions. Temperature range -2°C to +4°C (28°F to 39°F). All-round klister. For wet coarse snow as well as frozen corn snow. Scraper included.

Quick and Easy! Liquid grip wax for zero conditions. Liquid grip wax covering the range on the cold side below freezing in new and fine-grained snow conditions. 0°C to -3°C (32°F to 27°F). 2.4 fl. oz. For dedicated skiers demanding a fast and clean product with reliable kick qualities. Upside down applicator for better control! *Extremely flammable aerosol. Pressurized container: May burst if heated. Causes skin irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects.