Parts & Accessories
XLAB's Sonic Wing Dual Bottle Rear Carrier fits perfectly in seatposts with 2 6mm holes and lets you carry your gear behind you tucked out of the wind. This versatile carrier gives you options galore so you can easily attach what you need for any length ride. You also have 30 different mounting options and can keep it upright for low drag or invert it for easy access. And, since it attaches to the seatpost, the Sonic Wing works with most seats too. Its aluminum construction means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps. Compatible with Cervelo seatposts with two 6mm holes as well as the new QR PR6.
This reservoir with Thermal Control insulation turns any pack into an all-season 100-ounce hydration system. Features: - The Crux Reservoir delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - 10mm closed cell foam reservoir insulation - Insulated tube and bite valve cover - Attachment points - Large adjustable carry loop
Give your pack a lower center of gravity with the brand new Crux LR reservoir. It delivers 20% more water per sip while keeping weight positioned low on your back, which translates to better stability in the saddle and on the trail. The Crux delivers 20% more water with every sip, plus an on/off lever that seals your tube shut when you’re not drinking. CamelBak also upgraded the fill-port design to include an ergonomic handle and a redesigned a cap that’s more intuitive and easier to fill—small changes that make it that much easier to fill up and hit the road.
Integrated stainless steel storage bracket that fits under a bottle cage. Holds included Twin Speed Drive CO2 head, V5 multi tool, and two Matrix levers. It will also hold two CO2 cartridges (sold separately). - Weight: 95g /311g Loaded
The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 38 x 19 x 6 cm / 15 x 7.5 x 2.5 in
The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 30 x 18 x 6 cm/ 12 x 7 x 2.5 in
New Crux tube offers 20% more water per sip. Positions tube for convenient, hands-free drinking; no need to reach for a drink.
Keep your water flowing freely, even in the most harsh conditions. The Crux Thermal Control kit takes insulation to the next level so your tube and valve stay ice-free. Designed for reservoirs with the Quick Link system, this cold-weather accessory will extend the range of use your hydration pack during all outdoor adventures. Features: - Insulated Tube: Protects the flow of your fluids in cold conditions - Freeze-Proof Valve: Integrated cover keeps ice from forming in bite valve - Fits Reservoirs with Quick Link System: Keep your Crux working hard year-round with this easy upgrade
Have you ever tried to grab a bottle from an aid station then dump it into your aero drink on the fly? That can get messy. Profile's HC Mount w/KA1 Cage allows you to attach a bottle cage in between your extensions so you can grab a bottle and have it within easy reach. It's an easy way to add more water carrying capacity to your bike.
New Crux tube offers 20% more water per sip, and with the insulated thermal sleeve your water stays cooler in warm weather.
Aqua Cell replacement parts kit for use with the Profile Design Aqua Cell hydration system. - Kit includes straw, extra mesh, bottle tops, and rubber bands
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
A solid aluminum seatpost mount providing an extra location for a water bottle cage on e-bikes or smaller frames. MATERIAL - Diecast aluminum DROPPER POST DIAMETER - Fits ø27.2 - ø31.6 mm (shims incl.) ADDED FEATURE - Compatible with water bottle cage, Topeak BackLoader, tail light and saddle bag SIZE - 13.6 x 6.2 x 4.6 cm / 5.4" x 2.4" x 1.8"
The Antidote Thermal Control Kit upgrades any CamelBak Quick Link system to handle extreme winter and summer conditions. It includes: a Big Bite Valve mouthpiece, a mouthpiece cover, an insulated tube cover and a delivery tube.
Replace that old bite valve! CamelBak's Big Bite Valve mouthpiece slip on easily and add some color to your hydration. And, they're remarkably drip resistant.
Keep your reservoir free from taste and odor and ready for your next adventure. Fast-acting tablets are easy to use and work in just 5 minutes. - Periodic cleaning with CamelBak Cleaning Tabs keeps reservoir and tube free from taste and odor - CamelBak Cleaning Tabs work in just 5 minutes for a thorough cleaning - 8 Cleaning Tablets Per Pack.
Keep your tube close and hydration on-tap with the Magnetic Tube Trap.
The CamelBak Crux replacement tube has larger diameter and offers more water per sip than previous tubes. Pair with the Crux reservoir on/off valve (sold separately) for 20% more water flow per sip.
CamelBak's Magnetic Tube Trap keeps your hydration hose bite valve right where you need it for hydration on the go. Pull it off, take a sip, and pop it back so it's always where you want it. It fits any CamelBak reservoir hose.
Keep their favorite Eddy Kids bottles clean and in good working order with our replacement Bite Valve & Straw Set. This set works with original Eddy Kids, Eddy+ Kids bottles, and includes four multi-color bite valves and two clear straws. Simply follow the guidelines on the packaging and cut the straws to size. All parts are top-rack dishwasher-safe and BPA-, BPS-, and BPF-free. Recommended for ages 3+. - Reservoir hanger clicks easily into Mil Spec Crux Reservoir Quick Linkport - Detached tube clicks easily into hanger clip - Tube brush, reservoir brush, and cleaning tabs help keep your reservoir clean and taste-free - Extra-long cleaning brush perfect for cleaning CamelBak reservoirs, including Long Neck Water Beast, Omega Water Beast, Mil Spec Antidote and Mil Spec Crux reservoirs
Dry your reservoir quickly with the CamelBak Reservoir Dryer.
Keep your reservoir funk-free with this cleaning brush kit from CamelBak.
Want to keep your reservoir fresh and clean? Then pick up CamelBak's Reservoir Dryer. This handy accessory inserts into most reservoirs and separates the walls for effective drying.
Add a Hot Cap to your existing Chute Mag Stainless for an instant upgrade! The leak-proof cap allows 360° drinking from any side and is easy to twist apart and clean. Accessory fits any size of Chute Mag Stainless. Features: - 360° Cap: Allows drinking from any side of the bottle - Leak-Proof Rotating Valve: Twists open for easy sipping and twists apart for easy cleaning - Fits All Chute Mag Stainless Bottles: For giving your bottle an instant upgrade - Dishwasher Safe Cap: Cap assembly is top-rack dishwasher safe (hand wash vessel)
Upgrade your Tritan or Vacuum Insulated Stainless vessel with a new magnetic top in black or grey. Features: - Universal Cap: Compatible with Tritan and Vacuum Insulated Stainless - Easy Upgrade: Includes 1 Chute Mag Cap and 1 Chute Mag Cap tether - Dishwasher Safe: All parts are top-rack dishwasher safe - BPA, BPS & BPF Free: Taste your beverage, not the cap
Brew and infuse on-the-go! The multi-functional Tea Infuser accessory is a perfect fit with a wide variety of our vacuum-insulated stainless steel bottles and vessels. The large infuser basket is roomy enough for a robust batch of your favorite loose-leaf tea or coarse-ground coffee. Or switch it up and opt for fresh fruit and herbs for an ingenious infusion. The finely etched hole pattern keeps small particles and sediment contained inside the basket and out of your drink. Constructed in durable 18/8 stainless steel, infuser basket and strainers are dishwasher-safe and free of BPA, BPS, and BPF. Tea Infuser compatible with the following CamelBak universal cap stainless steel bottles: Forge Flow, Chute Mag, Hot Cap, MultiBev, Carry Cap. (excludes 64 oz. Carry Cap) - Multi-Functional Design: Use basket for loose tea leaves and coarse-ground coffee. Use strainer for fruit and herbal infusions - Etched Hole Pattern: Keeps fine particles contained inside the basket - Large Basket: Allows tea leaves to expand for maximum flavor extraction - Durable: 18/8 stainless steel Easy to Clean: All parts are dishwasher-safe
BiKASE's Handlebar/Seat Post Bottle Cage Bracket makes it easy to attach a bottle cage and bottle (both sold separately) to your handlebars or seat post. It's made of durable engineered plastic polymers and includes shims and hardware to fit on handlebars and seat posts with 24 to 32mm diameters or 32mm to 43mm diameters. It also rotates so you can set the bottle where you want it for easy access. • Material: POM head, PP bracket, Stainless steel hardware • Size: 8cm x 6cm x 2cm • Weight: 40 g • Fits handlebar 24mm-32mm • Versatile bracket rotates
Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.
CamelBak's Big Bite Valve mouthpiece offers hands-free hydration and is ideal for any application. And, it's remarkably drip resistant.
CamelBak's Ergo HydroLock controls your fluid flow with the flip of a switch. Turn it on to drink, turn it off for added security during transport. Simply insert it into the end of your CamelBak drinking tube and attach the valve to the other end. Plus, the 90-degree bend makes sipping on the go a cinch!
Page 1 of 2 Next page