Shoes

To make a full-featured shoe that rivals minimalist designs in weight, we created the imperial road shoe, which features our own ultralight monofilament Synchwire mesh upper that fits and feels like a second skin. The Imperial's Synchwire upper features Boa IP1 dials and soft lace guides, which allow you to adjust your fit on the fly while reaping the benefits of the shoes light weight. Thermal-welded Teijin TPU adds structural support exactly where it's needed, and a high-modulus Easton EC90 SLX2 carbon fiber plate provides ultimate stiffness-to-weight for power transfer. Our adjustable Super Natural Fit footbed system is the final touch, allowing you to customize arch support right out of the box for luxurious comfort and optimal pedaling efficiency. - One-piece Synchwire upper design with soft lace guides - Teijin welded SL monofilament mesh - Twin Boa IP1 dials featuring 1mm +/- micro adjustment and incremental release - Easton EC90 SLX2 high-modulus carbon - Stainless steel hardware - Replaceable heel pads - Supernatural fit kit with adjustable arch support - XT2 anti-microbial fiber top sheet - 215 grams (size 42.5)

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

What makes the perfect cycling shoe? Is it exceptional power transfer? Superior Comfort? Undeniable style? The simple answer is 'yes' to all of the above. With the S-Works 7, you get a shoe with no compromises. We took a no holds barred approach to transferring every bit of your power to the pedals. The lighter and stiffer Powerline carbon sole is new and brought to you by the same team that developed Rider-First Engineering. Why's this special? Because it led to their lightest and stiffest carbon outsole to date. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn't stretch when pulled on, making sure that your foot stays where it's supposed to. With these all features combined, you can be sure that Specialized kept in line with the motto "every watt is sacred." In the comfort arena, Specialized kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. They also took luxury into account by designing the S-Works 7 to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC'd alloy BOA dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial in your fit. The S-Works 7 embodies everything Specialized knows about footwear, compacted into one shoe–no compromises, no shortcuts, just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Specialized's stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 224g (1/2 pair, Size 42)

When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world’s best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It’s 1% faster than any shoe we’ve ever made, and at the finish line, that’s all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features—Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

When the moment comes for an attack in the hills, a long solo move, or a full-gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, fewer injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongue-less sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156

At just 185g per shoe with pro-level performance and unrivaled comfort, the Empire SLX lets you fly in first-class style. To make a minimalist shoe that retains the supportive structure of the legendary Empire while advancing the style, we started with a one-piece ultralight monofilament Synchwire mesh upper designed around a classic laced closure to fit and feel like a second skin. Thermal-welded Teijin TPU adds structural support exactly where its needed, and a high-modulus Easton EC90 SLX2 carbon fiber plate provides ultimate stiffness to weight for power transfer. Our adjustable Super Natural Fit footbed system is the final touch, allowing you to customize arch support right out of the box for luxurious comfort and optimal pedaling efficiency. - One-piece upper design - Premium Evofiber SL breathable Teijin microfiber upper - Empire laces: hold a knot, durable, and light - Easton EC90 SLX2 high-modulus carbon - Titanium hardware - Replaceable heel pads - Ultralight Super Natural fit kit with adjustable arch support - Ultralight footbed - XT2 anti-microbial fiber top sheet - 185 grams (size 42.5 with ultralight footbed)

KEY PERFORMANCE FACTORS SUPERIOR POWER TRANSFER An all-new ExoBeam outsole features a dual-beam design made with ultralight 100% carbon fiber for superior toe-heel stiffness. The unique design significantly boosts power transfer while allowing enough torsional flex for natural foot movement. This helps minimize lower leg strain during the pedal stroke with zero watts wasted. PERSONALIZED FIT Most cycling shoe enclosures press the foot down toward the sole. The Surge Pro’s redesigned ExoWrap system draws the foot up into the shoe, using its unique wrap-around design and new micro-adjust Li2 Boa® reels. The result is a 360-degree foot closure that gives you an ultra-comfortable and personalized fit. COOL COMFORT A new polyurethane coated mesh upper with laser cut micro-perforations delivers maximum ventilation combined with long-lasting durability. The seams are welded rather than sewn, which helps minimize weight and gives these road shoes a sleek profile with a supple feel. - All-new ExoBeam outsole features a dual-beam design made with ultralight 100% carbon fiber lay-up construction for superior toe-heel stiffness - An all-new 360º wrap-around upper with high frequency welded seams and laser cut micro-perforations for optimal ventilation and a balanced foot climate - All-new internal ExoWrap structure for an ultra-comfortable, 360-degree foot enclosure and a customizable fit - All-new exclusive performance last offers all-day comfort and increased fit options - All new micro-adjust Li2 Boa reels give a super secure and comfortable fit, Ultra grippy SharkSkin heel liner gives a secure, slip-free fit even under the harshest conditions - Removable sock liner with tunable arch support and TransTextura Plus antimicrobial layer promotes a balanced foot climate

The new Macha Pro helps you get the most out of every pedal stroke whether you’re out on a training ride or in a mid-race sprint. Anchored by the power of technology, the Macha Pro puts the Motion Efficiency System to work for you. These performance-level racing shoes are lightweight and efficient, and the stylish design comes in two colorways. FEATURES - 100% long-fiber carbon ExoBeam plate with all-new dual beam design, offers secure mid-foot contact for better power transmission - ExoBeam technology reduces strain on the knee and ankle joints - All-new 360º ultra-lightweight, wrap-around upper with high frequency welded seams offers optimal support - All-new internal, direct pull ExoWrap structure design with all-new dedicated Boa Li2 dial produces a 360° foot enclosure for customizable arch fit and support - Laser cut micro-perforations in the upper for improved ventilation, cycling-specific performance last enhances overall performance - SharkSkin heel lining, removable sockliner with tunable arch support and TransTextura Plus layer

The all-new S-Works Torch Lace delivers the timeless, refined style of a lace-up with an unprecedented level of efficiency, lightweight, and comfort thanks to Body Geometry. It all adds up to a shoe that disappears on your foot, yet begs to be seen. Like every shoe we make, the S-Works Torch Lace starts with Body Geometry - identify a problem, solve it with design, and validate it with science - to improve comfort, increase performance, and reduce the chance of injury for every rider. Comfort: The S-Works Torch Lace utilizes our new forefoot shape - 4mm wider than the S-Works 7 - based on extensive 3D foot scans and Retül data. The upper features remapped zonal layering throughout. It remains incredibly supple to adapt to different foot shapes, yet won’t stretch over a long day in the saddle to ensure a secure, consistent fit. An asymmetric heel counter reduces hard touch points against the ankle and still delivers knee stability validated by our Human Performance team. Efficiency: Every Body Geometry shoe optimizes ankle, knee, and hip alignment for a stable and pedal stroke with our patented Varus Wedge, a 1.5mm outward tilt to the outsole. Thanks to the lightweight retention of laces and watching every gram - from the carbon outsole to the upper material - the S-Works Torch Lace weighs a feathery 200 grams in size 42. With an internal ‘I-Beam’ the carbon outsole provides the ideal stiffness-to-weight ratio for big efforts without adding excess grams, optimized by working with the best riders in the world. Style: Beauty is in the eye of the beholder, and those that see the S-Works Torch Lace will get to admire them as long as they can hang on your wheel. With classic lines and understated colorways the S-Works Torch Lace is at home whether you chase finish lines or mountain tops before sunset. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Laced closure maintains the most opportunity to customize fit along the entire foot. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - Approximate weight: 200g (1/2 pair, Size 42).

OWN THE FIELD. Maximize your efforts as you drop the hammer. Power up the steepest, most technical climbs. Maintain stability and control as you unclip to cross a sketchy obstacle. Featuring a rubber-protected, 100% carbon, dual ExoBeam outsole combined with an all-new internal ExoWrap with dedicated BOA, the Charge Pro mountain bike shoe delivers the pinnacle of lightweight XC, CX and gravel performance. FEATURES - A 100% long-fiber carbon ExoBeam plate featuring a full rubber-covered dual-beam design, offers secure mid-foot contact on the pedal while un-clipped, without sacrificing torsional flexibility, stiffness, or power transfer - Reinforced high-density, water-resistant PU upper with laser-cut micro-perforations combines optimal support with extremely low weight while providing optimal ventilation and promoting a balanced foot climate - Unique fully internal, direct pull ExoWrap with dedicated Boa IP1 dial produces a 360° foot enclosure for customizable arch fit and support - Exclusive Slip-Last construction allows the forefoot to be stiff while enabling torsional ration of the rear and midfoot - Reversed forefoot strap ensures maximum comfort and a secure fit - Ultra grippy SharkSkin heel liner gives a secure, slip-free fit even under the harshest conditions - Molded TPU toe guard protects forefoot and features double secure cleat inserts - Removable sock liner with tunable arch support and TransTextura Plus antimicrobial layer promotes a balanced foot climate - Weight: 338g (size 45)

Dedicated to the strongest conformations, the Sidi Dragon 5 Mega guarantees a perfect feeling of comfort even for those with a wider sole or high instep, ensuring comfort, rigidity and performance. -The Soft Instep Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area -Tecno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The reinforced heel cup stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer -The MTB SRS Carbon-Ground Sole raises the standard for mountain bike performance, dropping off about 100 grams per pair compared to the previous Dragon Carbon SRS sole without sacrificing power or durability -The MTB SRS Carbon-Ground Sole uses replaceable tread blocks in the heel and the toe - The Ground SRS treads and MTB Plate are easily removable and replaceable

Great for riding on the course or off the beaten track, the Sector mountain bike shoe is ready to power up for adventures. Race-ready. Adventure inspired. The Sector combines a supple, breathable Synchwire upper with a stout carbon-composite plate and an aggressive, dual-injected rubber outsole for excellent traction that won't de-laminate or break down. A supportive 3D molded footbed with Aegis anti-microbial treatment enhances comfort and fit, which is adjustable via dual BOA L6 dials featuring 1mm adjustment and macro release. It's a great choice for riders looking for inspired performance that's capable on the course or off the beaten track. - One-piece Synchwire upper with thermo-bonded exo-structure - Reinforced heel and toe sections - Dual Boa L6 dial featuring 1mm adjustment and macro release, with steel lace and soft lace guides - 3D molded footbed with medium arch support - Carbon-composite 2-bolt plate with dual-injected rubber outsole - Stainless steel hardware - 342 grams (size 42)

With exceptional warmth and waterproofing for the coldest and wettest conditions, a heat-reflecting insole, and a QuickLace system that's housed under the outer shroud, your coldest days on the road are soon to be your favorite. The all-new Blaze is our core winter cycling shoe, featuring modern technical materials and design to reduce bulk while delivering exceptional warmth and weatherproofing for conditions down to -10° C /14° F. The heart of the Blaze is an internal, moisture-wicking mountain bike shoe that's fully insulated with a channeled, high-loft Primaloft synthetic sheath featuring 10,000 W/P + 10,000 GM2 wind- and waterproof performance plus a heat-reflecting insole and protective reinforcement in key wear zones. The result is a breakthrough in warm, dry comfort with purpose-driven details that inspire confidence to pedal through the toughest winter riding conditions. Specs: - Upper Construction: Stretch woven face fabric with 10,000 w/p + 10,000 GM2; film channeled, high-loft fleece interior plus elastic outer collar Primaloft synthetic insulation; Fully seam-sealed stitching; Breathable, moisture-wicking mesh upper inner shoe; Thermobonded rubber toe and heel reinforcements; Integrated ankle padding; Reflective detail at heel and side profile - Reflectivity: Reflective detail at heel and side profile - Footbed: Heat-reflective insole with high loft fleece and laminated foil - Outsole: Nylon-composite plate; Dual-injected "Ice grip" soft rubber outsole; Stainless steel hardware - Weight: 385g (Size 42)

From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price. In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5. - Dual Boa S2-SV Snap dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit. - Standard Fit for support and all-day comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 248g (1/2 pair, Size 42)

Pro-level Tri racing shoes designed to shorten transitions and optimize power transfer. Synthetic Leather Lighter, stronger and more durable than natural leathers External Heel Cup External curved heel cup suppresses foot twist and roll Quick Straps For fast triathlon transitions Carbon Sole/Mid Sole Carbon fiber composite sole/mid sole Wider Cleat Adjustment Expands range for mounting cleats - T1-Quick strap and extra-wide upper opening simplify and speed up transitions - Lightweight, rigid carbon fiber composite sole efficiently transfers power - Water-resistant microfiber synthetic leather with strategic venting - Breathable 3D mesh breathes great and dries fast - External heel cup stabilizes heel - Large heel loop is easier to grab

Take charge of the road with full-featured performance and comfort. To make a full-featured shoe that can handle extended miles and hard roads, we started with an ultralight monofilament mesh Synchwire upper that fits and feels like a second skin, then added thermal-welded TPU for structural support and resistance to grit and grime. Fast, intuitive fit adjustment is guaranteed with dual Boa L6 buckles, steel laces, and soft lace guides that allow you to get a precise fit with even pressure distribution to ensure comfort with every turn of the pedals. And finally, the advanced carbon composite plate ensures efficient power transfer and responsive feel at the pedals, while allowing 5mm of adjustment for optimal cleat positioning. Upper construction: - One-piece Synchwire upper with thermo-bonded exo-structure - Laser-perforated ventilation throughout - Dual Boa L6 dials featuring 1mm adjustment and macro release, with steel lace and soft lace guides - Reflective heel tab Footbed: - 3D-molded footbed with medium arch support Outsole: - Carbon-composite 3-bolt plate - Dual-injected TZU walking pads - Stainless steel hardware with 5mm fore/aft adjustment Product weight: - 265 grams (Size 42)

Take charge of the road with full-featured performance and comfort. To make a full-featured shoe that can handle extended miles and hard roads, we started with an ultralight monofilament mesh Synchwire upper that fits and feels like a second skin, then added thermal-welded TPU for structural support and resistance to grit and grime. Fast, intuitive fit adjustment is guaranteed with dual Boa L6 buckles, steel laces, and soft lace guides that allow you to get a precise fit with even pressure distribution to ensure comfort with every turn of the pedals. And finally, the advanced carbon composite plate ensures efficient power transfer and responsive feel at the pedals, while allowing 5mm of adjustment for optimal cleat positioning. Upper construction: - One-piece Synchwire upper with thermo-bonded exo-structure - Laser-perforated ventilation throughout - Dual Boa L6 dials featuring 1mm adjustment and macro release, with steel lace and soft lace guides - Reflective heel tab Footbed: - 3D-molded footbed with medium arch support Outsole: - Carbon-composite 3-bolt plate - Dual-injected TZU walking pads - Stainless steel hardware with 5mm fore/aft adjustment Product weight: - 265 grams (Size 42)

The Recon 3.0 is all about putting the legendary performance of our S-Works Recon - power transfer, comfort, light weight, style - in a package perfect for the XC and gravel rider. Starting with Body Geometry, Recon 3.0 delivers comfort and efficiency, with features that stand-out off the beaten path. Looking for in the saddle speed as well as off-bike performance? Recon 3.0 mates a carbon outsole with a Pave-inspired glass fiber forefoot to create Carbon STRIDE toe-flex, which lets your foot function naturally off the bike, yet still provides incredible power transfer with a stiffness index of 10.0. Whether you're flying up a run-up on the 'cross course or strolling into the brewhouse post ride, STRIDE toe-flex is a game changer. We know venturing off-road means venturing into the unknown, so we've given the Recon 3.0 XPEL Mesh to create a comfortable fit that sheds water, keeping the shoe light and making it dry as fast as it rides. Our SlipNot compound provides full rubber coverage of the outsole for off bike traction on any surface, with open treads to eject mud. Dual L6-Snap Boas and a Velcro forefoot closure ensure micro adjustable comfort with a secure fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0) - Fully-welded upper reduces seams for superior step-in comfort. - Independent BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain with removable toe studs. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 355g (1/2 pair, Size 42)

SUPERIOR PERFORMANCE. Thanks to an all-new, dual-design thermoset carbon/glass fiber composite ExoBeam plate, internal ExoWrap for custom arch fit and secure BOA closure, the Charge Elite mountain bike shoe provides the power transfer, efficiency and fit you need to move you up to the head of the pack. FEATURES - Exclusive thermoset carbon/glass fiber composite ExoBeam plate featuring a full rubber-covered dual-beam design increases power transfer and stability. - Reinforced high-density, water-resistant PU upper with laser-cut micro-perforations combines optimal support with extremely low weight while providing optimal ventilation and promoting a balanced foot climate. - On-the-fly micro-adjustment Boa Fit System combines with ExoWrap for superior fit. - Exclusive Slip-Last construction allows the forefoot to be stiff while enabling the torsional ration of the rear and midfoot. - Reversed forefoot strap ensures maximum comfort and a secure fit. - Ultra grippy SharkSkin heel liner gives a secure, slip-free fit even under the harshest conditions. - Molded TPU toe guard protects forefoot and features double secure cleat inserts. - Removable sock liner with tunable arch support and TransTextura Plus antimicrobial layer promotes a balanced foot climate. - Weight: 356g (size 45)

Trickle-down performance. Surge Elite features all of the performance benefits of Surge Pro thanks to a new thermoset carbon/glass fiber composite ExoBeam outsole combined with a BOA System closure with indirect ExoWrap independent arch support to provide a seamless connection to your bike for maximum pedaling efficiency. The unique bonded seam non-woven PU upper material offers optimal support and low weight for hours of comfort in the saddle. - Bonded seam non-woven PU upper material offers optimal support, low weight and conforms to virtually every foot type - Die cut perforations provide ventilation and promote a balanced foot climate - Unique on-the-fly micro-adjustment BOA System closure with indirect ExoWrap independent arch support for every foot and arch type - Exclusive to Giant, Slip-Last construction allows the forefoot to be stiff while enabling torsional rotation of the rear and mid foot - Cycling-specific performance last enhances efficiency and overall performance - Exclusive ExoBeam technology with thermoset carbon/glass fiber composite is slightly heavier than the Pro plate but features the stiffness and performance benefits - Redesigned ExoBeam technology produces better pedaling efficiency while reducing strain on the knee and ankle joints - Injection molded TPU removable heel element and fixed toe protect the ExoBeam plate from wear - Grippy SharkSkin heel lining for secure heel fit - Removable sockliner features TransTextura Plus antimicrobial layer to help promote a balanced foot climate - Weight: 315g (size 43)

PIN IT TO WIN IT. Whether it’s a rolling singletrack, long gravel climb, or a cross course so stupid-technical and weathered, the all-new Tesca mountain bike shoe is engineered to give you every advantage. The Motion Efficiency System featuring the incredibly efficient and comfortable ExoBeam sole and ExoWrap enclosure will keep up with you as you embark on the never-ending sprints of XC, CX or gravel endeavors. FEATURES - Motion Efficiency System—keeps the forefoot stiff while enabling torsional movement of the rear and midfoot - Injected long-fiber MES composite plate for a lightweight and stiff sole that preserves knee health - Injection-molded TPU wear elements throughout the sole protect the plate while off the bike - Full rubber outsole (heel/midfoot) for durable grip - Injection-molded toe guard protects from rocks and increases the durability of the shoe - Double-secure toe cleat inserts for exact cleat placement - Removable ultra-lightweight insoles that come in a variety of arch support levels to match your foot - Internal EXOWrap for custom arch fit - Microfiber upper with laser-perforation for enhanced ventilation to maintain a comfortable foot environment - Custom insole with a breathable TransTextura Plus sock-liner that lets heat escape - Anti-slip heel patch made from a Sharkskin textured TPU material, so your feet don’t go swimming in the shoe - Unique on-the-fly micro-adjustment BOA closure system integrated with ExoWrap technology offers unsurpassed fit and support - The forefoot strap and BOA are oriented with opposing closure forces that provide a more secure fit with improved comfort by eliminating unnecessary pressure - Engineered with Liv’s 3F Design Philosophy dedicated to women - Exclusive Slip-Last construction allows the forefoot to be stiff while enabling torsional rotation of the rear and midfoot

ROAD COMPETITION LEVEL SHOES INFUSED WITH S-PHYRE DNA. FEATURES - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Ultra-rigid hollow carbon midsole efficiently vents air and drains water. - Supple high-density synthetic leather with perforation and lightweight mesh/TPU combination bring superior fit and comfort. - Dual independent BOA® L6 dials allow quick, micro tension adjustments. - Adjustable powerzone lace guide securely holds forefoot. - SHIMANO DYNALAST promotes smoother pedaling and more efficient power transfer.

The all-new Union BOA® Shoes are set to take your mountain bike adventures to new, more adjustable, and sendier levels of "yew!" Get more power to the pedal and customize your fit to perfection with the dual BOA® Li2 system featured in these trail-ready shoes. Built with robust features including a molded cap design to protect against rock strikes, the Union mountain bike shoes handles the rigors of trail abuse with ease. With a lightweight and precise fit, the low-profile, custom-tuned midsole ratchets up your pedal grip and feel, giving you more comfort while you shred. Power to the pedal is optimized care of the molded internal stiffening plate, but it's not stiffness at the expense of off-bike comfort. Should you have to hike-a-bike around that downed tree, you're all good. The sole is designed using the Ultratac™ rubber compound, with the engineered tread pattern providing best-in-class grip and durability, while the 2-bolt cleat system is compatible with most major clipless pedal suppliers. Versatile and with understated style, Union BOA® Clipless MTB Shoes were born to rip, transitioning from sweet single track to your post-ride tailgate brews with ease. - Clipless mountain bike shoes with Boa® - Dual Boa® Li2 system secure, on-the-fly adjustability - Ultratac™ outsole balances grip and durability - Reinforced toe for protection against rock strikes

In the heat of competition, you want a shoe that maximizes comfort and efficiency during the bike leg, while also helping you get in and out of transition as fast as possible. The new Trivent SC addresses all those needs, with performance-enhancing, tri-specific features, plus Body Geometry ergonomics for true comfort and great fit. Its stiff Body Geometry sole and footbed delivers superb efficiency and power transfer, while the looped heel with pull tab and wide entry/exit closure minimizes time in the transition area. Our pro triathletes demanded ultimate ventilation and faster transitions—you get to reap the rewards. Body Geometry sole construction and footbed: ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT Powerline™ carbon/composite sole for light, stiff power transfer: Stiffness Index 10.0. - Thermobonded construction for a smooth internal lining for "sockless" fit and comfort. - Large, looped heel pull keeps tab accessible for easy shoe changes in transitions. - Debossed fold lines allow for easy shoe flattening for flying starts. - Supple upper with open-air mesh for maximum ventilation. - Three-bolt cleat pattern fits all major road pedals. - Wide closure system allows for easy entry/exit and disperses forces through the shoe for a comfortable and secure fit. - Rubberized heel for increased traction during transitions. - Approximate weight: 242g (1/2 pair, size: 42)

Don't let rain or cold stop your ride. The Defroster Trail Mountain Bike shoes feature a seam-sealed bootie construction, Thinsulate insulation, and a neoprene collar to help keep your feet warm and dry even in the worst conditions. Meanwhile, a grippy SlipNot rubber sole provides incredible stability and traction in slippery conditions. They're just what you need to keep riding through the season, no matter what Old Man Winter has in store for you. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Thinsulate 400-gram insulation for warmth, with waterproof, seam-sealed internal bootie construction and reflective heat-loss barrier in the sole. - Sealed canopy and neoprene collar keep heat in and water out. - Nylon composite sole with wet traction SlipNot rubber tread: Stiffness Index 6.0. - Single Boa dial for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Fully reflective to increase your visibility to motorists in low-light conditions. - Roomy fit to accommodate winter weight socks—no need to size-up. - Durable sheet rubber heel and toe protection. - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 533g (1/2 pair, Size 42)

Transfer maximum power to the pedals. The Kestral Pro Boa combines our stiffest sole and clipless compatibility for an efficient all-mountain ride. The Boa Fit system means you can dial in a secure fit, while the wide Stealth C4 rubber sole provides confident footing in all terrain. Mesh inserts enhance breathability, and the quick-drying synthetic upper maintains all-weather comfort. - Boa Closure System for micro-adjustment, and secure and consistent hold - Mesh inserts enhance breathability, and the quick-drying synthetic upper maintains all-weather comfort - Stealth C4 rubber sole provides confident footing in all terrain - Durable, lightweight EVA midsole - Enjoy the comfort and performance of OrthoLite sockliner - Regular fit, clipless style

With pedal power, a sticky rubber outsole, and an easy Boa and forefoot strap closure system, you can head out wherever the trail takes you in the Ventana Mountain Bike Shoe. This shoe is built around a stout nylon shank proven on the DH World Cup circuit to power the pedals efficiently and combined with an injected EVA cushioning midsole plus our exclusive Sensor rubber outsole that inspires confidence when scrambling over rocks and logs. The fit is secure and supportive thanks to a Boa micro-adjustable buckle and forefoot strap closure, while a reinforced heel and toe box offer protection from scrapes and impacts. - One-piece Synchwire upper design with PU bonded mesh - Rubber reinforced heel and toe sections - Boa l6 dial featuring 1 mm adjustment and macro release, with steel lace and soft lace guides - Velcro forefoot strap - Injected EVA cushioning midsole - Sensor rubber compound engineered for durability and grip - Stainless steel hardware - Molded EVA footbed with medium arch support - 417 grams (size 42.5)